德國菲希爾Fischer公司ISOSCOPE FMP30渦流涂層測厚儀
費希爾新款涂層測厚儀產(chǎn)品系列
DELTASCOPE FMP10 為磁性涂層測厚儀，訂貨號：604-301
ISOSCOPE FMP30渦流涂層測厚儀，訂貨號：604-298
DUALSCOPE FMP20為磁性/渦流涂層測厚儀，訂貨號：604-285
DELTASCOPE FMP30為磁性涂層測厚儀，訂貨號：604-297
ISOSCOPE FMP30為渦流涂層測厚儀，訂貨號：604-299
DUALSCOPE FMP40為磁性/渦流雙功能涂層測厚儀，訂貨號：604-286
（上圖）常用磁性非磁性雙功能探頭：FD10，訂貨號：604-143，測量范圍：磁性：0-1300 μm，渦流，0-800 μm
（上圖）常用渦流探頭：FTA3.3H，訂貨號：604-142，測量范圍：0 - 1200 μm
（上圖）常用磁性探頭：FGAB1.3，訂貨號：604-141，測量范圍：0 - 2000 μm
The rugged ISOSCOPE® FMP series uses the eddy current method according to DIN EN ISO 2360, ASTM B244. It measures:
Paint, lacquer or plastic coatings on non-ferromagnetic metal substrate materials; used for anodic coatings on aluminum
as well as electrically anodic coatings on aluminum and electrically conducting coatings on non conducting carrier materials.
A special application is the measurement of thin chromium coatings on copper.
For further product information, please click on the header of the relevant product within the technical spreadsheet below.
The ISOSCOPE® FMP30 as a part of the new FMP30-40 series is even more versatile than the standard models. These instruments integrate additional features such as more memory for up to 100 applications as well as extensive statistical and graphical evaluations. Tolerance limits can be entered into the calibratable applications and the production process can be analyzed statistically. The default mode can be switched to matrix mode for connected multipoint measurements. These are only a few of the many features described below.
| ISOSCOPE FMP30 | ISOSCOPE FMP10 | ISOSCOPE MP0 USB | |
| Probes | plug-in type | plug-in type | integrated |
| Applications | 100 | 1 | 1 |
| Statistics | Extensive evaluation, e.g. process tolerance limits and graphical evaluation | Common values, e.g. mean value and standard deviation | Common values, e.g. mean value and standard deviation |
Characteristic Features of the ISOSCOPE® FMP30:For all eddy current probes
Features additional to those of the basic series:
Memory for up to 20,000 readings
Up to 100 calibratable applications
Capability of allocating readings into up to 4,000 Blocks
Date and time stamp for blocks
Statistics display of common characteristic values in the block and final results. Output of characteristic variance-analytical values
Graphical measurement display as a histogram with a Gaussian plot
Capability of entering process tolerance limits and computation of the associated process capability indices cp and cpk
Audible and visual warning when tolerance limits are exceeded
Free-running display with additional presentation of the reading as an analog bar between the tolerance limits
External key-triggered measurement acquisition, e.g., in hollow cylinders with small diameters
Capability to enable matrix measurement mode for connected multi-point measurements
Capability of averaging measurement data: Only the mean value of several readings will be stored
Measurement acquisition through area measurement possible: Only the single readings until probe lift-off are captured and averaged
Capability to measure continuously with the probe placed on the specimen
Outlier rejection for the automatic elimination of erroneous measurements
Correction of any stored reading
Application linking mode: Ability for common normalization/calibration of applications
Designations for applications through the optional PC program MP-Name
USB port to a printer
Battery and line power operation
ISOSCOPE FMP30渦流涂層測厚儀經(jīng)典配置：ISOSCOPE FMP30主機+FTA-3.3H
所有評論僅代表網(wǎng)友意見，與本站立場無關(guān)。