德國karldeutsch公司DEUTROPULS磁粉探傷儀（42V）手軛的產品描述：
1.DEUTROPULS磁粉探傷儀在探傷過程中不會灼傷工件,重量輕，價格低。
2.電源簡單，不需要使用變壓器，可以直接使用42V電源。
3.可以根據工件的形狀，使用不同的磁，特別是遇到傾斜工件表面時，可以靈活轉動磁，保證小的磁能損失。
上海耀壯檢測儀器設備有限公司經銷商，為客戶提供的服務。
德國卡爾德意志公司DEUTROPULS磁粉探傷儀的特點：
●高磁化電源
●高負載率
●磁場分配
●便于操作的形狀
●42V電源
●可移動的磁
●可用于熒光磁粉探傷
德國karldeutsch公司DEUTROPULS磁粉探傷儀（42V）手軛的技術參數：
| 磁間距 內側 帶有活動磁 | 135mm 45 - 225mm |
| 能耗：吸附工件/離開工件 | 300/950VA±10% |
| 電源：磁+5m電纜 | 42V50/60Hz 初始電壓：220V 二次電壓：220V |
| 負載率 | 50% |
| 磁化場強 空載 負載 | 12.8A/m(163 Oe) 4.1A/m(53 Oe) |
| 漏電保護級別 | I |
| 漏電保護類型 | 防液體飛濺外殼 |
| 磁場強度 | 大12.6kA/m |
| 尺寸(長/寬/高) | 240/47/145 |
| 重量(包括電纜) | 3.6kg |
Mobile Crack detection: Safe and reliable
The DEUTROPULS Hａnd Yoke is a mobile yoke for magnetic particle inspection with extra magnetization performance, easy handling and for miscellaneous applications. The robust design allows reliable magnetic particle crack detection also under harsh conditions. The mechanical design takes the highest safety demands into account. The instrument is fully sealed with high-quality casting resin against humidity. The optimal positioning onto the different workpieces is possible with the help of interchangeable extended, angled or flexible attachment poles respectively.
Models and features
Available in two versions:
The 230 V AC version can be connected to the power supply system either directly or via an isolating transformer (230 V promary / 230 V secondary) for alvanic isolation. The 42 V AC version (low supply voltage is fed by an isolating transformer (order no. 3850.242) which is connected primary to 230 V and provides a secondary voltage of 42 V or 35 V respectively.
More features:
Weight optimized design with high magnetization performance
User-friendly shape with short travel switch
Resistant to high voltages and high dielectric strength
High-quality resin casted housing
Easily exchangeable cable
Replaceable switch, sealed according to IP65, very high switching stability
High duty cycle
Characteristics in compliance with DIN EN ISO 9934-3:2002, ASTM E1444-05
We make a point of safety!
Every DEUTROPULS Hａnd Yoke is subjected to an earth conductor test and is high-voltage resistant. Die 230 V version is protected against overheating by an integrated temperature sensor.
The exchangeable attachment poles of the hａnd yoke
DASt directive 022 „Hot-dip galvanizing of supporting structural steelwork“
The new attachment poles ensure reliable magnetic particle testing through hot-dip galvanizings and thus permits testing in compliance with the DASt directive 022.
With the newly developed, geometrically optimized attachment poles of the hａnd yoke a field strength of more than 4 kA/m (40 A/cm) is achieved permitting magnetic particle testing of weld seams through the galvanizations. The magnetizing time and the post-magnetizing time is 6 seconds each. If required, available DEUTROPULS Hａnd Yokes can be retrofitted with these special attachment poles.
Hａnd yoke with new attachment poles for testing according to the DASt directive 022
Ordering information
DEUTROPULS Hａnd Yoke 230 V
without attachment poles, 5 m cable
3446.230
DEUTROPULS Hａnd Yoke 42 V
without attachment poles, 5 m cable
3446.042
Attachment poles 10 mm (2 ea)
3852.102
Attachment poles 45° (2 ea)
3852.302
Attachment poles 60 mm (2 ea)
3852.402
Attachment poles 100 mm flexible (2 ea)
3852.202
Two-windings transformer
primary 230 V, secondary 230 V
3850.322
Two-windings transformer
primary 230 V / 110 V, secondary 35 V / 42 V
3850.242
Extension cable for hａnd yoke, 20 m
3839.200
Carrying case for hａnd yoke
3850.502
FLUXA testing agent for high contrast indications
refer to leaflet P90E
所有評論僅代表網友意見，與本站立場無關。