一． 用途
主要用于橡膠的熱煉，壓片，塑煉及混煉。
二． 結構特點
1.滾筒材料為冷硬鑄鐵，表面堅硬耐磨輥筒結構有鉆孔或中空方式進行加熱或冷卻，使輥面溫度均勻。
2.傳動系統用硬齒面減速器，結構緊湊噪音低，效率高。
3.輥筒采用調心軸承，耗能低，維修方便，使用壽命長。
4.機器設有液壓力和電動力反轉制動裝置，當發生緊急事故時，按下開關，機器立即制動或反轉，安全可靠。
5.潤滑系統采用一體循環潤滑式，減少漏油現象。
XK series rubber mixing mill
一．Usage
It mainly used for thermal refining, sheeting, plasticating and mixing of the rubber.
二． Structure &features
1. Roller material is Chilled cast iron, with hard & abrasion-resistant surface. Roller structure: hole drilling style or hollow style is used for heating or cooling to make even temperature for the roller surface.
2. Transmission device uses harden gear speed reducer, compact structure, efficient transmission, low noise.
3. Roller adopts self-aligning bearing, low energy consumption, easy to maintain, long lifespan.
- With hydraulic &electrical reverse braking device, you can just press the switch when urgent accident happens, and machine will immediately brake or reverse, safe & reliable.
- Lubricating system adopts the circulation lubrication type as an organic whole,seal structure with special design,saving the oil leaked.
型號model | XK-160 | XK-230 | XK-250 | XK-360 | XK-400 | XK-450 | XK-560 |
輥筒工作直徑roll dia | 160 | 230 | 250 | 360 | 400 | 450 | 560/510 |
棍筒工作長度roll working length | 320 | 600 | 620 | 900 | 1000 | 1200 | 1530 |
前輥線速度front-roll liner speed | 8.95 | 10.21 | 14.1 | 16.25 | 18.65 | 24.26 | 27.72 |
輥筒速比roll ratio | 1:1.35 | 1:1.19 | 1:1.17 | 1:1.25 | 1:1.27 | 1:1.27 | 1:1.2 |
輥距max roll space（mm） | 4.5 | 7 | 8 | 10 | 10 | 15 | 15 |
一次加膠量compound feeding capacity（kg） | 1-2 | 6-10 | 8~15 | 20~25 | 18-35 | 25-50 | 35~60 |
電動機功率motor power | 5.5 | 15 | 18.5 | 30 | 37 | 55 | 90 |
外形尺寸dimension： | 1380×860 | 2800×1200 | 3400×1500 | 3780×1850 | 4350×1850 | 5200×2380 | 5845×2284 |
所有評論僅代表網友意見，與本站立場無關。