Sicom傳感器、Sicom探測器、Sicom探頭、
Sicom數據監控設備 、Sicom流量計、Sicom化工泵
品牌簡介:
潤滑油或燃料與熱表面接觸時在發動機內部產生油煙。損壞的軸承由于摩擦引起的熱也能導致油霧。
Sicom探測器價格
油煙濃度在為50mg/L以上時它的可燃性變高,可爆炸,會造成大范圍的發動機損壞和在最壞的情況下,影響人的生命安全。
主要產品:Sicom傳感器、Sicom探測器、Sicom探頭、Sicom監控設備、
SiCOM系統時一個油霧檢測系統無老一代OMD系統的缺點。SiCOM這是一個無插管系統,SiCOM傳感器直接安裝在發動機壁允許在每個室中快速、準確的測量產生的油霧。
The measurement data of each sensor in SICOM is evaluated by sending a redundant serial bus and displaying the data of the whole system.
Up to 16 sensors can be connected to a calculator. In the event of an alarm, the evaluator is equipped with two independent relays, which can start the engine shutdown to prevent further damage.
In addition, the measured data can also be transferred from the evaluator through a specially designed software to the PC or the portable monitoring device of the system.
The SICOM detector measures the oil mist directly in the engine. This is very sensitive, so it can measure the minimum amount of oil mist. There are no moving parts, no pipes, the installation is very simple, almost no maintenance. The sensor can be used in gasoline and diesel engines.
The software can display, store and play back the measured data.
The SICOM monitoring device can display the measured data as the monitor. It can also be used to reset the alarm.
SOG and diffuser
SOG protects the anti splash from entering the measuring unit in the engine. Its multi chamber design allows only oil mist to enter the measurement section. The diffuser can be installed on the SOG to provide better oil splashing protection under the condition of high oil splash concentration.
評估器的目的是在引擎室里承受的環境。其抗振動允許靠近發動機的安裝沒有任何特殊的支持。安裝在發動機上,利用特殊的振動阻尼特性原理。
評估在一個合金的盒子里,包括液晶顯示器(LCD),三個LED指示。
用戶交互的系統狀態和五膜按鈕。功能強大的微控制器內部評估分析測量數據的連續顯示液晶屏上的數據并觸發報警繼電器的油霧的情況下,光柱顯示使定位更容易
- SiCOM容易安裝 連接電線簡單
- SiCOM插管無吸力油煙和溫度系統
- 聯網不間斷監測
- 油煙數值直觀以mg/l單位顯示
- 在發動機各個區間都實行溫度監控
- 如果安裝位置合適系統也可以測量濺出油的油溫
- 自冗余測量系統
- SiCOM系統光學探頭無需任何額外保養 自動保護不會被濺出的油濺上
- 無任何可移動部件
- SiCOM探頭可在任何時候更換
燦勤實業(上海)有限公司我們將為您提供全系列產品,且常備庫存,不僅有質量保證,價格*,而且交期快,定是您的供應商,歡迎!
燦勤實業(上海)有限公司
Canqin Industry (Shanghai) Co Ltd.
?。簭埾壬?/p>
所有評論僅代表網友意見,與本站立場無關。