| SX-800 | Determination of motor oil freezing temperature and diesel fuel with additives ; 有添加劑的柴油燃料和機動油冷凍溫度的確定 |
| SX-850 | Determination of dynamic viscosity within the temperature range from +50C to -50C; 在+50C 到 -50C的溫度范圍內動態粘度的確定 |
| SX-900K | Determination of crystallization temperature of aviation kerosene down to -70C. 低至-70C的航空煤油的結晶溫度的確定 |
| SX-900A | Crystallization temperature of antifreeze 防凍劑的結晶溫度 |
OPLCM is intended for crystallization temperature measurement of the jet-plane fuel, diesel fuel cloud-point and freezing temperature measurement, motor oil freezing temperature and dynamic viscosity measurement in the laboratory and field conditions.
OPLCM是在實驗室和野外的條件下，用于噴氣式飛機燃料、柴油燃料霧化點和冷凍溫度的測量、發動機油冷凍溫度和動態粘度的測量。
OPLCM is a new generation instrument, and depending on modification can be used for fuel and oil quality control. Each model is unique in itself, and all methods of analysis and arrangement are patented. The common feature for all instrument modifications is cryostat with cooling down to minus 60C (diesel fuel and motor oil) and down to minus 70C during analysis of jet fuel. The instrument has LC display which shows the examination process in real time mode. The instrument's case is ergonomic and can resist any oil product or solvent.
OPLCM是新一代的儀器，根據修正后可以用于燃料和石油質量的控制。每一個模型自身都是無二的，所有的分析和布置方法都是取得的。所有這些儀器的共同特點是在噴氣式燃料分析中，低溫恒溫器能將溫度冷卻到零下60C（柴油燃料和機動用油）和零下70C。儀器帶有 LC演示，它可以顯示在真實的時間模式中的檢測過程。儀器的盒子是人類工程學的，可以抵抗任何石油產品和溶劑。
Advantages of the OPLCM instrument
OPLCM儀器的優點
OPLCM is an instrument for rapid analysis of diesel fuel, and oil as well as for aviation kerosene in laboratory and factory environment. It is powered from 220V power line.
OPLCM是在實驗室和工廠環境中，對柴油燃料、石油、航空煤油進行快速分析的儀器。它的能量來源于220伏電源線。
Low temperature characteristics of aviation kerosene is determined with a laboratory test called "crystallization temperature detection". During the course of the test the fuel sample is cooled down until paraffin OPLCMs are formed and detected with the optical monitoring system. The accuracy of the parameter is very important for safety of the plane flights.
航空煤油的低溫特征由叫做“結晶溫度檢測"的實驗室組件確定。在檢測的過程中，燃料樣品通過光學監控系統得到降溫直到鏈烷烴OPLCM形成和被檢測。參數的準確性對于飛機的安全飛行非常重要。
Temperature of motor oil freezing is detected using special sensor that records the moment of sample transition from solid state into liquid. In order to do that the sample is being cooled down until complete solidness, and after that the sensor system is turned on.
通過使用記錄樣品由固態轉化為液態時刻的傳感器，機動油的冷凍溫度得到檢測。為了做到這一點，樣本要被降溫直到固化，之后傳感器系統才打開。
In the same way to aviation kerosene, the principal of cloud point temperature determination for diesel fuel is based on short-range infrared transillumination of the sample.
航空煤油用同樣的方法，確定柴油燃料霧化點溫度的主構基于樣本的短期間的紅外線透照法。
Dynamic viscosity is determined by rotation viscosimeter.
動態粘度取決于旋轉粘度計。
The process information is shown on the liquid OPLCM display in all modifications of the instrument.
過程信息顯示在所有修正儀器的液體OPLCM上。
The microprocessor processes the results of measurement.
微處理器處理測量的結果。
The external cryostat is not required, the built-in cryostat is made on Peltiye elements. Toxic coolants and dispensable are not used. The radiator of Peltiye element is cooled with water.
外部的低溫恒溫器不需要，內置的低溫恒溫器由Peltiye 元素制成。有毒的冷卻劑和非必要的物品不被使用。Peltiye 元素的散熱器用水降溫。
The major goal of any laboratory is to provide the highest level of measurement results reliability. In order to increase the accuracy of temperature measurement the user can input correction data into nonvolatile memory.
任何一個實驗室的主要目的就是提供高水平的測量結果的可靠性。為了增加溫度測量的準確性，使用者可以輸入正確的數據到非易失存儲器中。
Instruments of OPLCM series meet all ISO 9001 requirements.
OPLCM系列儀器全部滿足ISO 9001的要求。
Specifications of the OPLCM instrument OPLCM儀器的說明
| № | Parameter description 參數描述 | Value |
| 1. | Sample volume, ml 樣本容量，毫升 | 1,9+0,1 |
| 2. | Limit of cooling temperature, C 冷卻溫度的限度，攝氏度 | - 70 |
| 3. | Inaccuracy of cloud point temperature detection, degrees C 霧化點溫度檢測的不精確，攝氏度 | 1 |
| 4. | Inaccuracy of freezing temperature detection, degrees C (type of detection - mechanical) 冷凍溫度檢測的不精確，攝氏度（檢測類型-機械） | 2 |
| 5. | Inaccuracy of dynamic viscosity detection, % 動態黏度檢測的不精確，% | 3 |
| 6. | Maximum time of test, min 檢測時間的值，分鐘 | 25 |
| 7. | Minimal time between tests, min 檢測之間時間的最小值，分鐘 | 15 |
| 8. | Compliance with test method 符合檢測方式 | ASTM D 2386, D 5901, ASTM D 4684, ISO 3013 |
| 9. | Working conditions(temperature) of the instrument, C 儀器的工作條件（溫度）， | from +15 to +35 |
| 10. | Dimensions, mm 容積，毫米 | 240х240х140 |
| 11. | Weight, kg 重量，千克 | max 3 |
| 12. | Mean-time-between-failures, hours 故障間的平均時間，小時 | not less than 1000 |
Major advantages 主要優點
Test process is completely automated 檢測過程是自動化的。
The instrument has high speed and accuracy of measurement 儀器具有檢測的高速度和準確性。
The instrument is compact 儀器是簡潔的。
所有評論僅代表網友意見，與本站立場無關。